Cairns' Trusted Ceramic Coating Specialists

Cairns Paint That Stays Protected for Years

Cristo Detailing applies professional-grade ceramic coatings across all of Cairns, giving your car a hard, chemical-resistant shell that shrugs off the heat, humidity, and wet season grime. Quote back within the hour.

Get a Free Quote Now

Or call now: +61437741906

Why Cairns Cars Need More Than a Regular Wax

Cairns is rough on paint. The UV index here sits in the extreme range for most of the year, the wet season dumps salt-laden moisture across your panels, and mango sap, bird droppings, and road grime all do their damage in between. A standard wax lasts weeks. A ceramic coating lasts years.

A properly applied ceramic coating bonds directly to your clear coat, creating a 9H-hardness layer that resists UV fade, oxidation, chemical etching, and water spotting. Your car holds its colour. The paint stays cleaner between washes. And when you go to sell, a well-maintained coated car commands a noticeably stronger resale price.

This is not a detailing add-on. It is a long-term investment in your vehicle. One application from Cristo Detailing protects your car through multiple wet seasons without needing to be reapplied every few months.

Get a Free Quote Now

Real Ceramic Coating Results

Before Ceramic Coating BEFORE
After Ceramic Coating AFTER

Mazda CX-5 hood: heavy water spotting and UV haze before, deep gloss and beading ceramic finish after

Ceramic Coating Packages

Choose the level of protection that's right for your vehicle.

Essential Protection

  • ✓ Full exterior decontamination wash
  • ✓ Clay bar treatment to remove embedded contaminants
  • ✓ Single-layer ceramic coating applied to all painted panels
  • ✓ Hydrophobic water-beading finish
  • ✓ UV fade and oxidation resistance
  • ✓ Post-application inspection and cure check
Get a Free Quote
Most Popular

Pro Shield

  • ✓ Full exterior decontamination wash and iron fallout removal
  • ✓ Clay bar and paint surface prep
  • ✓ Light paint correction to remove light swirl marks before coating
  • ✓ Two-layer ceramic coating on all painted exterior panels
  • ✓ Ceramic coating applied to glass surfaces
  • ✓ Enhanced hydrophobic and UV protection
  • ✓ Post-application multi-point inspection
Get a Free Quote

Elite Armor

  • ✓ Full multi-stage paint decontamination and iron fallout treatment
  • ✓ Clay bar treatment and surface polish prep
  • ✓ Full single-stage paint correction for clear swirls and light scratches
  • ✓ Multi-layer ceramic coating system on all painted surfaces
  • ✓ Ceramic coating on glass, trim, and wheels
  • ✓ Tyre and wheel arch protection treatment
  • ✓ Interior protection coating on key surfaces
  • ✓ Full post-cure inspection with documented before/after condition report
Get a Free Quote

The Ceramic Coating Process

1

Book Your Free Quote

Fill out the quote form and Carlin gets back to you within the hour. No waiting around, no chasing. You will get a clear outline of which tier suits your vehicle and what to expect on the day.

Under 60 seconds to submit
2

Full Decontamination Wash

Before any coating touches your paint, the entire vehicle is put through a proper decontamination wash. This removes road grime, brake dust, iron fallout, and any existing product residue sitting on your panels. Skipping this step is why cheap coatings fail early.

45 to 90 minutes
3

Clay Bar Treatment

A clay bar is worked across every painted panel to pull out bonded contaminants the wash cannot reach, including industrial fallout, tree sap residue, and embedded particles. The paint needs to be completely smooth before coating goes on.

30 to 60 minutes
4

Paint Correction (Where Included)

On Pro Shield and Elite Armor tiers, any swirl marks, light scratches, or oxidation are corrected using a machine polisher before coating. A ceramic coating locks in whatever is underneath it, so the paint needs to look right before it goes on.

1 to 4 hours depending on paint condition
5

Ceramic Coating Application

The coating is applied panel by panel using applicator blocks, then carefully levelled off before it flashes. This stage requires a controlled environment and precise timing. Each layer bonds directly to the clear coat, not just sitting on top of it.

1 to 3 hours depending on tier
6

Cure Period and Final Inspection

Once coated, the vehicle is left to begin its initial cure. Carlin walks through the full vehicle with you, documents the condition, and gives you straightforward maintenance instructions so the coating lasts as long as it should.

30 minutes inspection, 24 to 48 hours full initial cure
Get a Free Quote Now

Ceramic Coating FAQ

Cristo Detailing offers three tiers of ceramic coating, Essential Protection, Pro Shield, and Elite Armor, at different price points depending on the level of prep work and coating layers involved. Exact pricing depends on your vehicle size and paint condition. Get a free quote and Carlin will give you a clear number with no surprises.
Most ceramic coating jobs take between four and eight hours depending on the tier and the condition of your paint. Elite Armor with full paint correction can run longer. Carlin will give you an honest time estimate when you get your quote so you can plan accordingly.
A professionally applied ceramic coating will last between two and five years depending on the product, the number of layers, and how well it is maintained. Cairns conditions, including intense UV and the wet season, mean that proper prep and a quality product matter a lot. Cristo Detailing uses coating systems built to handle the Far North Queensland climate.
After the initial cure period, you wash it like normal, but you will notice the car stays cleaner longer and dirt rinses off more easily. Avoid automatic car washes with abrasive brushes. A hand wash or touchless wash every two to four weeks is all it needs. No waxing required.
Warranty details vary by tier and are confirmed at the time of your quote. Carlin stands behind the work and uses coating systems that come with manufacturer backing. If something is not right after application, it gets sorted. Ask about warranty specifics when you get your quote.
Wax needs to be reapplied every six to eight weeks and offers almost no protection against UV or chemical etching. Ceramic coating lasts years and creates a chemically bonded layer that wax cannot replicate. Paint protection film offers stronger physical impact resistance for high-risk areas like the front bumper and bonnet, and some clients combine both. For most Cairns drivers who want durable, low-maintenance paint protection without the cost of full film, ceramic coating is the practical choice.
Yes, ceramic coating works on any vehicle with a painted surface, including cars, utes, SUVs, and 4WDs. The paint does need to be in reasonable condition before coating. Carlin will assess your paint when you come in for your quote and let you know if any correction work is needed first.
Yes, the vehicle needs to stay with Cristo Detailing for the full duration of the job. Most clients drop off in the morning and pick up late afternoon. You will get a clear timeframe when you book so you can arrange transport for the day.

Book Your Cairns Ceramic Coating Before the Wet Season Hits

Cristo Detailing serves all of Cairns and spots fill up fast before the season changes, get your free quote now and lock in your date with Carlin.

Or call now: +61437741906